.jpg)
KASTAŞ NO |
d (f9) |
D1 (± 0,1) |
D2 (H10) |
b |
S1 (-0/+0,2) |
r |
c |
| |
K30-010 |
10 |
19 |
17 |
8.4 |
7.5 |
1,1 |
1.5 |
K30-012 |
12 |
24 |
22 |
9,5 |
8,5 |
1,1 |
1,5
|
K30-012/1 |
12 |
22 |
20 |
8.5 |
7.5 |
1.1 |
1.5 |
K30-014 |
14 |
26 |
24 |
9,5 |
8,5 |
1,1 |
1,5
|
K30-016 |
16 |
28 |
26 |
9,5 |
8,5 |
1,1 |
1,5
|
K30-018 |
18 |
28 |
26 |
8,5 |
7,5 |
1,1 |
1,5 |
K30-020 |
20 |
32 |
30 |
9,5 |
8,5 |
1,1 |
2
|
K30-022 |
22 |
34,5 |
32 |
9,5 |
8,5 |
1,4 |
2
|
K30-025 |
25 |
37,5 |
35 |
9,5 |
8,5 |
1,4 |
2
|
K30-030 |
30 |
42,5 |
40 |
9,5 |
8,5 |
1,4 |
2
|
K30-032 |
32 |
44,5 |
42 |
9,5 |
8,5 |
1,4 |
2
|
K30-035 |
35 |
47,5 |
45 |
9,5 |
8,5 |
1,4 |
2
|
K30-040 |
40 |
52,5 |
50 |
9,5 |
8,5 |
1,4 |
2
|
K30-045 |
45 |
57,5 |
55 |
9,5 |
8,5 |
1,4 |
2 |
K30-050 |
50 |
63,2 |
60 |
9,5 |
8,5 |
1,8 |
2 |
|
 |
K30 is a single acting wiper seal combination which consists of a metal vulcanized with elastomeric nitrile rubber using special production methods.
PRODUCT ADVANTAGES
• Superior wiping effect
• Superior sealing effect
• Wide range of dimensions
• Able to work in hard conditions
• Good adjustment to temperature changes due to the metal ring
APPLICATION
Pneumatic cylinders.
|
MATERIAL |
|
CODE
|
NBR |
70 SHORE A |
NB7001 |
STEEL |
ST37 |
FE9901 |
|
|
MEDIA |
Prepared , dried and de-oiled compressed air |
TEMPERATURE |
-30°C +105°C |
PRESSURE |
≤16 Bar |
SPEED |
≤1.0 m/sn |
Note: The above data are maximum values and cannot be used at the same time.
|
|
|
|
SURFACE ROUGHNESS |
Rmax
|
Sliding Surface Ød |
≤4 μm
|
Groove Base ØD2 |
≤10 μm
|
Groove FlanksS1 |
≤15 μm
|
INSTALLATION
K30 wiper/seal is fitted into the housing by means of a circlip recess. The sealing part is pushed in and fixed by the circlip. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.
NOTES For special applications that require high temperatures , K30 can be produced in FKM material.
|
|
|
|