K64

   KASTÃ NO d(e9) D(H10) D1(H11) B(+0.2/-0.0) B1 b
 K64-004 4 8,10 6,70 3,00 3,80 4
 K64-006 6 11,10 9,10 3,60 4,60 5
 K64-008 8 14,10 12,10 3,60 4,60 5
 K64-010 10 16,10 14,10 4,20 5,40 6
 K64-012 12 16,50 14,20 3,00 3,60 4
 K64-016 16 20,50 18,20 3,00 3,60 4
 K64-016/1 16 23 18,8 4,2 5,4 6
 K64-020 20 25,00 22,40 3,40 4,00 4,6
 K64-025 25 30,00 27,40 3,40 4,00 4,6
 K64-030 30 35,5 32,9 4 4,8 6


K64 is a single acting pneumatic rod seal ensuring that foreign particles are not introduced into the pneumatic cylinders. The lip is designed in a particular way that it functions as a rod seal and wiper.

PRODUCT ADVANTAGES
•Superior sealing effect
•Superior wiping effect
•Low dynamic friction
•Minimal space requirement
•Highly wear resistant

APPLICATION
Compact and special small cylinders
MATERIAL   CODE
PU    92 SHORE A  PU9201
OPERATING CONDITIONS

MEDIA Prepared , dried and de-oiled compressed air
TEMPERATURE -30°C +80 °C
PRESSURE ≤16 Bar
SPEED ≤1.0 m/sec
Note: The above data are maximum values and cannot be used at the same time.
    
SURFACE ROUGHNESS Rmax
Sliding Surface Ød
≤4 μm
Groove Base  ØD ≤10 μm
Groove Flanks  B ≤15 μm

INSTALLATION
It can be assembled into closed groove without any tools. K64 does not need additional element such as circlip for axial fitting within the housing. We recommend using special assembly tool. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the sealing element must be oiled with system oil.